The ATC-804 is an Surge Protection USB to 4-Port RS-232 converter that is designed for PC, thin client, or server to provide instant COM port expansion via the Universal Serial Bus (USB). Supports Windows 95/98/Me, 2000, 2003, XP, Vista,Win7, CE, Linux. The ATC-804 provides the scalability to quickly adapt to new USB technologies. This is HL-340 USB serial port (COM) USB to RS232 USB Nine Serial Line Support Windows 7-64. USB to RS232 conversion cable for USB and serial devices easily connect serial devices with features such as Plug and play, hot-swappable. Click the driver names to download the driver. You can use 'Ctrl'+'F' keys to search the product you want. Bluetooth Driver CSR Chip Driver Bluetooth 4.0 Adapter (Compatible with: 4 3) 2. PCIE Driver 30771 RTS8111 Chip Driver for Linux 30771 RTS8111 Chip Driver for FreeBSD 30771 RTS8111 Chip.
Some devices will only connect to your computer using a port called 'RS232 Serial Port'. This port was used on old computers before 2003.
RS232 was the universal/popular port back in the old days just like USB is today.
In short, all you need to know is...
Modern computers no longer have RS232 port (extinct just like VGA port is). So all you need to get is a RS232-to-USB converter. It's about $5 on eBay. Just search for: rs232 usb
When you buy it, you'll need to install it to Windows-based computer. Here's how...
Step 1: |
Connect RS232 device into any USB port on your laptop/computer. Allow 20+- seconds for Windows to attempt to install drivers automatically.
If it's successful, skip to Step 2 below.
However in 95% of cases, it will fail to automatically install the drivers. So you have to install drivers manually.
Here's how...
1) Disconnect RS232 device from your computer.
2) Install both driver packs below...
- Driver Pack 1
- Driver Pack 2
- Driver Pack 3
3) Restart your computer.
4) Connect RS232 device into any USB port. This time Windows will auto-install the drivers. You can verify a correct install going to Device Manager. Here's how...
Control Panel » System » Device Manager
Control Panel » System » 'Hardware' tab » Device Manager
You should see something like this:
If install STILL failed to install the drivers or above 'Prolific...' device has a yellow triangle next to it, then: Install the driver file from the disc that came with the RS232 Device.
Step 2: |
Verify RS232 device is connected to COM PORT number between 1 to 4. This is a MUST, else it will not work.
Here's how to do this...
Right-click on 'Prolific...' device in Device Manager and click on 'Properties'. As seen below. Then:
That's it! It's now working 100% as it should. |
This device provides a simple and easy way to connect Universal Serial Bus (USB) and Serial port interface. With the advantage of USB port, users have the capability to utilize the peripheral with serial port interface in an easy to use environment such as plug and play & hot swap function. This adapter is designed for ideal connections to Cellular Phone, Digital Camera, Modems or ISDN terminal adapter with over 1Mbps data transfer rate.
The USB-high Speed Serial Converter and software drivers are capable of providing a no-firmware-change feature that enable USB interface to be transparent to serial port peripherals with minimum modifications.
1 USB to RS232 Converter
2 Compatible with USB1.1,2.0 highest speed can reach 12 Mbps
3 Supports remote wake up and power supply management
4 Supports hot plug and PnP,Need no I/O location and IRQ setting, friendly UI
5 Supports RS-232 handshake protocol, support full duplex data operating mode
6 RS-232 serial port transmission speed maximum 460.8Kbps
7 RS-232 serial port TXD,RXD offer 600W lightning strike & surge protection power on each line.
USB Interface | |
USBCompliance | USB 1.0/1.1 compliant, USB 2.0 compatible |
Connector | USB type A |
Speed | 12 Mbps (Full-Speed USB) |
Serial Interface | |
RS-232 full handshake line | |
Connectors | DB9 male |
Serial Line Protection | |
ESD Protection: 15 KV embedded for handshake line.600W surge protect for TXD,RXD signal Performance | |
Baudrate | 50 bps to 460.8Kbps |
Serial Communication Parameters | |
Data Bits | 5,6,7,8 |
Stop Bits | 1,1.5,2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | RTS/CTS, XON/XOFF |
I/O Address | Assigned by BIOS |
IRQ | Assigned by BIOS |
FIFO | 64 bytes |
Serial Signals | |
RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
Driver Support | |
Operating Systems | Windows (2000, XP x86/x64, 2003 x86/x64,Vista x86/x64), WinCE 6.0, Linux 2.6 x86/x64 |
Physical Characteristics | |
Housing | ABS+PC |
Dimensions | 60 x 35 x 17mm (The USB Cable length is 1000mm) |
Weight | 100g |
Environmental Limits | |
Operating Temperature | -20 to 70℃ |
Operating Humidity | 5 to 95% RH |
Storage Temperature | -20 to 70℃ |
Company products are widely used with the electric power, industrial control, telecommunications, commerce, banking, insurance, security, smart CARDS, and other industries, production and sales of the products of the company, supporting complete, cost-effective, timely and thoughtful service.ATC - 810 is a USB transfer RS - 232 interface converter, 600 w surge protector, protect the equipment from lightning.Products are widely used in the attendance, entrance guard, selling rice, monitor, car park management, and other fields.Good product not only implement different signal transformation, communication, also let your computer extend the serial port resources.
ATC-810Products | 1PCS |
ATC-810user's manual | 1PCS |
ATC-810 CD | 1PCS |